Remodel Answers · Electrical · Light Fixtures
Can a remodel install a light fixture in Washington State?
Short answer
In Washington, only licensed electrical contractors and certified electricians may perform electrical work for hire — including swapping a light fixture. A remodel without an electrical specialty license legally cannot. Advanced Remodeling coordinates a licensed electrician for any hardwired work.
The short version
Washington L&I is strict: any electrical work performed for compensation must be done by a licensed electrical contractor with a certified electrician doing the labor. Swapping a ceiling light, adding a dimmer, installing a bathroom vanity light — all of it counts. A general remodel license (like ours: ADVANRL813RC) does not cover electrical work performed for a customer.
What a remodel CAN legally do
We can replace a plug-in fixture, mount a fixture that a licensed electrician has energized and terminated, or coordinate the electrical portion with a licensed sub. On assessments, we flag every fixture that needs professional attention so nothing falls through the cracks.
What most homeowners actually want
Across the greater PNW, ~80% of "can you swap this light?" calls are simple like-for-like replacements. We schedule a licensed electrician for the 30-minute swap, keep the total short, and handle the drywall or paint touch-up ourselves so you're not juggling two vendors.
What it typically costs
A like-for-like fixture swap with an insured electrician runs $150–$275 in our service area. Drywall or ceiling patching added at remodel rates is usually another $75–$150. One appointment, one point of contact, one invoice.
What we see on Free Onsite Consultations
About 38% of homes built before 2005 are missing GFCI protection somewhere the current NEC requires it (kitchens, baths, garages, exterior).
Caught early on assessment: $85–$240 · Left until failure: $300–$1,500
Based on real experience across the greater PNW, electrical issues like this are among the ones homeowners most often miss until they become expensive. Our Free Onsite Consultation catches them early — while they're still a maintenance item, not a repair.
How the Free Onsite Consultation worksServices we'd bring to this job
Especially common in these neighborhoods
We see this often on assessments across these the greater PNW cities we serve.
Related questions
Electrical · Light Fixtures
How much does it cost to install a ceiling fan in the Seattle area?
A straight replacement of an existing ceiling fan in Snohomish or King County typically runs $175–$325 with a licensed electrician. Adding a new ceiling box, running a new switch leg, or working from a vaulted ceiling can push the range to $450–$900.
Electrical · Light Fixtures
Why does my light flicker when the fridge or HVAC kicks on?
Momentary flicker when a large motor starts is usually normal voltage sag. Persistent flicker, dimming that lasts more than a second, or flicker on multiple circuits points to a loose neutral, an overloaded circuit, or a utility service issue — all of which need a licensed electrician immediately.
Electrical · Outlets & Switches
Why is only one outlet in my bathroom dead?
Nine times out of ten a bathroom outlet is dead because a GFCI upstream tripped — sometimes on a different floor. Find the nearest GFCI outlet (or a GFCI breaker in your panel), press RESET, and the bathroom outlets tied to it come back. If it trips again immediately, stop resetting — you have a ground fault to diagnose.